Skip to product information
1 of 10

ALEKO

ALEKO 5-Person Wood Fired Hot Tub & Ice Bath | Internal Stove | Pine

ALEKO 5-Person Wood Fired Hot Tub & Ice Bath | Internal Stove | Pine

Regular price $3,379.00 USD
Regular price $0.00 USD Sale price $3,379.00 USD
Sale Sold out
Shipping calculated at checkout.
Quantity
View full details
  

The ALEKO 5-Person Wood Fired Hot Tub is an oval outdoor soaking tub constructed from kiln-dried Nordic Spruce / Scots Pine (Pinus Sylvestris) with a marine-grade 304 stainless steel internal wood-burning stove. It holds 422 gallons of water, heats to a maximum of 104°F using standard firewood, and requires no electricity or external power source. The tub can be filled with cold water and ice for cold soaking use. Included accessories are a wooden paddle, insulated cover with safety lock straps, and entry steps. The internal stove and all water-contact surfaces use food-grade 304 stainless steel.

No electricity, no pump, no jets — the ALEKO wood fired tub heats on firewood and works anywhere you can set it up outdoors.

Why This Hot Tub

Internal wood-burning stove — marine-grade 304 stainless steel combustion chamber (~18" W × 20" D × 24" H) with a 6-foot stainless steel chimney flue (4" diameter) and protective mesh heat shield guard; more efficient heat transfer than external stove configurations.

No electricity required — fully off-grid operation; no electrical hookup, no pump, no jets; compatible with standard dry hardwood or softwood logs cut to 12–16 inches.

Kiln-dried pine construction — Nordic Spruce / Scots Pine (Pinus Sylvestris) treated for moisture resistance and outdoor durability; rust-resistant stainless steel hardware throughout.

Dual hot/cold use — fill with hot water heated by the internal stove or fill with cold water and ice for cold soaking; same tub, two uses.

422-gallon oval capacity — 73" W × 47" D × 35" H exterior; 47" W × 35.4" D × 35" H interior; seats up to 5 people.

Insulated cover included — thick heat-retaining cover with safety lock straps keeps out debris and retains water temperature between uses.

Key Features

  • Internal Stove — 304 stainless steel; ~18" W × 20" D × 24" H combustion chamber
  • Chimney Flue — 6 ft stainless steel pipe; 4" diameter; mesh heat shield guard
  • Firewood Compatible — 12–16" dry hardwood or softwood logs; seasoned hardwood recommended
  • No Electricity — fully off-grid; 0 electrical components
  • Pine Construction — kiln-dried Nordic Spruce / Scots Pine (Pinus Sylvestris); moisture-treated
  • Food-Grade 304 Stainless Steel — all internal water-contact surfaces
  • 422-Gallon Capacity — 5-person oval; 73" W × 47" D × 35" H exterior
  • Dual Use — hot water soaking or cold water / ice bath use
  • Insulated Cover — heat-retaining; safety lock straps
  • Included Accessories — wooden paddle, insulated cover, entry steps
  • ISO 9001 — manufactured under ISO 9001 quality standards

Specifications

Spec Value
Brand ALEKO
Country of Origin China
Shape Oval
Capacity 5 person
Water Capacity 422 gallons
Exterior Dimensions 73" W × 47" D × 35" H
Interior Dimensions 47" W × 35.4" D × 35" H
Exterior Color Beige / Bisque
Interior Color Sandbar
Wood Species Kiln-dried Nordic Spruce / Scots Pine (Pinus Sylvestris)
Stove Type Internal wood-burning
Stove Material Marine-grade 304 stainless steel
Stove Dimensions ~18" W × 20" D × 24" H
Chimney Flue 6 ft stainless steel; 4" diameter; mesh heat shield
Firewood Compatibility Dry hardwood or softwood; 12–16" log length
Water-Contact Surfaces Food-grade 304 stainless steel
Maximum Temperature 104°F / 40°C
Electricity Required None (0V / 0A)
Number of Jets 0
Product Weight 640 LB
Certifications ISO 9001
Warranty 180-day limited

What's Included

  • ALEKO wood fired hot tub (pine body, internal stainless stove)
  • Insulated cover with safety lock straps
  • Wooden paddle
  • Entry steps

Installation / Setup Notes

The ALEKO wood fired hot tub requires no electrical connection. Place on a level, stable, non-combustible surface capable of supporting the filled weight of the tub (422 gallons of water weighs approximately 3,520 LB; total filled weight approximately 4,160 LB including tub). Fill using a standard garden hose. Fire the internal stove using dry hardwood or softwood logs cut to 12–16 inches. Seasoned hardwoods such as oak, maple, or birch are recommended for maximum heat output and minimal creosote buildup.

Ensure adequate clearance around the chimney flue. The chimney extends approximately 6 feet above the stove. Keep flammable materials clear of the chimney and heat shield. Check local fire codes and ordinances before use. The Peak Suite recommends consulting a licensed contractor for site preparation if the installation surface requires reinforcement.

Shipping & Warranty

  • Warranty: 180-day limited
  • Shipping: See our Shipping Policy — this item ships freight due to 640 LB product weight
  • Returns: See our Return Policy

Common Questions

Does the ALEKO wood fired hot tub require electricity?
No. The ALEKO wood fired hot tub operates entirely on firewood and contains no electrical or electronic components. No outlet, pump, or power source is required.

What type of firewood does it use?
The stove is compatible with standard dry hardwood or softwood logs cut to 12–16 inches in length. Seasoned hardwoods such as oak, maple, or birch are recommended for maximum heat output and minimal creosote buildup.

Can this tub be used as an ice bath?
Yes. The tub can be filled with cold water and ice for cold soaking use. The same tub body is used for both hot and cold water applications.

How long does it take to heat the water?
Heating time depends on ambient temperature, starting water temperature, firewood type, and fire management. The stove heats 422 gallons to a maximum of 104°F; plan for several hours of fire time from cold fill.

What is the warranty?
The ALEKO wood fired hot tub is covered by a 180-day limited warranty. See our Return Policy for the claims process.

How heavy is this tub when filled?
The tub weighs 640 LB empty. At 422 gallons, the water adds approximately 3,520 LB, for a total filled weight of approximately 4,160 LB. Ensure your installation surface is rated for this load.

Disclaimer

Ensure adequate clearance around the chimney flue. Keep flammable materials clear of the chimney and heat shield. Check local fire codes and ordinances before use. The Peak Suite recommends consulting a licensed contractor for site preparation if the installation surface requires reinforcement. Specifications are provided by the manufacturer; verify site requirements before purchase.